BX569A Portable biogas Detectors with pump

BX569A portable biogas Detectors with pump, adopting NDIR detecting principle, is used to analyze the CH4 and CO2 during the biogas processing. At the same, with external PH sensor, it can also analyze the PH level of the biogas fluid. By combining tip detecting technology and simple operation, this device has the advantages of high accuracy, good stability and excellent craftwork etc.

Features:

-Adopting advanced low-consumption 16-digit MCU

-128*64 lattice display and humanization operation menu

-Self test function after being activated, self diagnosis and self renovation

-Intrinsically safe design to avoid explosion inside the device

-Double power design,charger and battery are all available

-Calibration points can be adjusted, so the user can calibrate it easily

-Advanced long-life NDIR gas sensor

-Audio, video and vibration alarm

-Low voltage alert

-Important setting used combination key to avoid faulty operation

-Simple self calibration program

-Adopting high-strength plastics with skidproof rubber,

-The housing is hi-strength,feel very nice.

Specifications: 

Target gas:CH4 and CO2

Sampling method Pump sampling

Gas sensor:NDIR

Detecting range:CH4:0-100%vol;CO2:0-5%vol (Can be specified);

                PH:0.0-14.0

Alarm level:The user can set it in the detecting range.

Error:CH4/CO2:<= +/-2% F.S;PH:+/-0.2PH

Response time:<30s

Indication:LCD displays the real time and status;

                Voice alarms

Working condition:Temperature: -20^oC-55^oC; Humidity: <95%RH No dews 

Air pressure: 86 kPa-106 kPa

Power supply:Two pcs AA Batteries

Charging time:More than 2h with pump

Working time Not less than 8 hours in normal working condition.

Sensor life:2 years

Dimension:lXbXh,mm: 209X110X40

Weight:About 410g

BX569A-Portable-biogas-Detectors-with-pump.pdf