Differential Pressure Sensor

Model:HPC20
Pressure range: 0-10Kpa~2MPa
The HPC series piezoresistive pressure sensor. Is a OEM sensor with constant current silicon-oil filled pressure sensor. The measured pressure or differential pressure of medium is delivered to a silicon bridge by a stainless steel membrane and silicon oil.  Apply the piezoresistance effect of diffused silicon to fulfill the linear transfer from measured pressure to voltage signal. The sensors have characteristics of high reliability, repeatability and stability..
And its stainless steel isolated diaphragm enable it used wide in rugged application widely, such as chemi-industry, process control, liquid pressure system and switch, etc.

HPC: Constant Current Input 1.5m ADC

HPV: Constant Voltage Output 10 VDC or 5VDC

Technical Data:
Pressure range: 0-10Kpa~2MPa
Input: Constant Current: 1.5mA DC or
Output Impedance:3KW to 6KW
Output Impedance:2.5KW to 6KW
Response (10%~90%): <1ms
Insulated resistor: 100MW, 100VDC
Overpressure: 3 time FS or 100MPa, (small . value is valid)
Input: Constant Current: 1.5mA DC or Constant Voltage;10VDC or 5VDC

Features:
Constant current power supply
Isolated construction, enable to test various media
Full stainless steel 316L
Wider temperature compensation range -10^oC ~ +80^oC

Application:
Differential Pressure Sensor

Differential-Pressure-Sensor.pdf

Differential Pressure Sensor,Micro Differntial Pressure sensor,Pressure Sensor